Email this to a friend
 
posted on November 7th 2015, at 15:43
by lunarg
To enable SSH on Dell Networking N-series (formerly known as Dell PowerConnect), you first have to generate the required private RSA and DSA keys. If you don't, you're met with a very secretive error message:

SSH could not be enabled.

To generate the keys, and configure and enable SSH, log on to the switch using the console cable or log on through Telnet:

Go into EXEC mode, then in CONFIG mode:

enableconfigure

Generate both the RSA and DSA keys:

crypto key generate rsacrypto key generate dsa

Now, you can enable the SSH server:

ip ssh server

Optionally: you can also change the protocol and/or default listen port:

ip ssh protocol 2ip ssh port 22

Optionally: after enabling SSH, you c  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1498664196
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.