Assuming you have not configured that specific port as an L-Port, this can happen where the HBA did not completely log on to the fabric. This issue has been known to happen on Emulex HBAs.
To resolve, simply disable and re-enable the port on the SAN switch:
portdisable <port-number> portenable <port-number>
« ‹ | April 2024 | › » | ||||
Sun | Mon | Tue | Wed | Thu | Fri | Sat |
1 | 2 | 3 | 4 | 5 | 6 | |
7 | 8 | 9 | 10 | 11 | 12 | 13 |
14 | 15 | 16 | 17 | 18 | 19 | 20 |
21 | 22 | 23 | 24 | 25 | 26 | 27 |
28 | 29 | 30 |