Email this to a friend
 
posted on December 9th 2016, at 10:53
by lunarg
When deploying a vShield Manager VA, its IP address is set to DHCP by default. Once deployed and started, you can log on through the console to change it to a fixed IP.

Open a VMWare console to the appliance and log on:

manager login: adminPassword: ****** (the CLI 'admin' password you entered during the deployment)

Go into enable mode and enter the setup:

manager> enablePassword: ****** (the enable password you entered during the deployment)manager# setup

Enter the IP address, subnet mask, gateway and DNS settings. When finished, you will be prompted to log out.

Note that after setting the IP address, I had to restart the appliance because the web interface was only accessible on t  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1493402546
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.