Email this to a friend
 
posted on October 13th 2014, at 12:46
by lunarg
Installing a firmware upgrade on your Dell Force10 MXL IOM works similar (but slightly differently) than the other Force10 series. There are two things to upgrade: the IOM firmware and IOM operating system. The first has to be upgraded through CMC (not documented here), the second through the switch itself.

To upgrade FTOS, you need console access (can be SSH/Telnet) to the switch and an SCP/FTP/TFTP server.

If you have none of these, you can download tftp32/64. This is a light-weight TFTP-server which does not need to be installed and can be run as an application on any networked computer. Place the downloaded firmware (the BIN-file) in the same location as the tftp32/64 executable and st  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1502983697
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.