Email this to a friend
 
posted on July 3rd 2018, at 14:58
by lunarg
When using VMware vConverter Standalone 6.1 or newer, performing a P2V may fail very early in the process with the following error:

Error
FAILED: A file I/O error occurred while accessing ''.

You can work around the issue by enabling Use proxy mode on the Destination System page at the conversion wizard. As an alternative workaround, perform the P2V directly to a ESX host.

The reason for the error has to do with the ESX host's certificate not being trusted when performing a P2V to a vCenter.

If the Use proxy mode does not resolve your issue, please check whether the FQDN of the ESX host is resolvable on the machine running vConverter. Even when using strictly IP addresses, the FQDN still  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1728579239
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.