Email this to a friend
 
posted on November 6th 2007, at 22:57
by lunarg
The trouble with PSTN lines is that the CID has to be transmitted in-band, and there are more than one standard in doing this. On top of that, there are small differences between the various Telcos on the planet. And finally, to make things worse, documentation about it, is sparse and scattered at best.

The settings displayed usually go in /etc/asterisk/zapata.conf (either directly, or by inclusion).

How CID is handled is defined by the following variables:

cidsignalling: tells how the CID signalling occurs, can be bellcore (mostly US hardware), v23, or dtmf.

cidstart: specifies how the start of the CID transmission is indicated. Can be polarity (the polarity on the wire is swit  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1728052078
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.