Backtrack:  
 
by lunarg on July 10th 2015, at 12:35

No_Light means there's no link on the port. Usually this indicates a problem with the physical wiring, either a faulty cable, or the TX/RX have been swapped.

No_Sync means there's a link on the port (so technically, wiring is okay), but there's a problem with the actual communication. The most common problem is a mismatch in speed on the switch port and the HBA on the other side. Your best bet would be to set the port's speed (temporarily) to auto-negotiate and see what speed is selected. If this does not work, try manually setting the port fixed to lower speeds.

 
 
« October 2021»
SunMonTueWedThuFriSat
     12
3456789
10111213141516
17181920212223
24252627282930
31      
 
Links
 
Quote
« Smith & Wesson - the original point and click interface »