Email this to a friend
 
posted on October 10th 2017, at 14:36
by lunarg
To properly shut down the NetApp (through the CLI):

First, close down all I/O to the NetApp by dismounting volumes, turning off servers, etc.

Log in on the NetApp through the CLI, using either a console cable or via SSH. Note that if you use SSH, you will not be able to see the complete shutdown sequence.

On the first controller, turn off cluster failover: cf disable



Shut down the controller: halt



Log on to the other controller (using SSH or swap the console cable), then shut down that controller too: halt



Wait until the shutdown sequence has completed before removing power from the controller chassis, then turn off the enclosures. You can use a console cable to verify whether th  ...

Send a link to this post to yourself or a friend.

Send to e-mail:
Your name:
Your e-mail:
Captcha:
Type the letters and numbers as shown.
/get/captcha/1513567407
Not readable? Get another.
 
Information entered is solely used for sending a one-time e-mail, and is not retained and/or passed on to a third party.
 
 
 
 
« December 2017»
SunMonTueWedThuFriSat
     12
3456789
10111213141516
17181920212223
24252627282930
31      
 
Links
 
Quote
« When a bird does poo poo in your eye, be happy elephants don't fly. »